PA Amplifier for Buildings in Mumbai

A black public address mixer amplifier with a row of volume knobs

Cease Fire & Electrical Services LLP supplies, installs and maintains the PA amplifier for public address systems in Mumbai, for housing societies, offices, hotels, hospitals, schools and factories. The PA amplifier is the heart of the system: it takes the voice from the microphone or zone call station, plus any recorded message or music, and drives the speakers across the building. We size the amplifier to your speakers, connect it to the fire alarm where needed, and test every zone before handover.

How a building PA amplifier works

Most building PA systems use a 100 V line. A transformer in the amplifier raises the output to 100 V so the signal can travel hundreds of metres on thin cable, and a small transformer at each speaker brings it back down. Each speaker is set to a power tap, such as 1.5 W, 3 W or 6 W, and all speakers connect in parallel on the line.

Mixer amplifier
Combines microphone, music and message inputs in one unit, for small and medium buildings
Power amplifier
Drives the speaker lines from a separate mixer or controller, for larger systems
Zone amplifier or zone selector
Sends announcements to one floor, several floors or all zones

How to size a PA amplifier

Add up the power taps of every speaker on the amplifier, then add a reserve of about 10% to 20%. For example, 40 ceiling speakers on the 3 W tap need 120 W, so a 150 W amplifier leaves a sensible reserve. Separate zones can share one amplifier through a zone selector or have their own amplifiers.

Working with the fire alarm

Many PA amplifiers have a priority or emergency input. When the fire alarm panel triggers it, background music is muted and an evacuation message or live announcement goes out to the chosen zones. For buildings that need a certified voice alarm system, EN 54-16 is the European standard for voice alarm control and indicating equipment.

What to tell us

Speakers
Number, type and power tap of each speaker, or your BOQ
Zones
How the building should be split for announcements
Sources
Microphones, zone call station, music, recorded messages
Fire alarm link
Whether the PA should respond to the fire alarm panel

Supply, installation and servicing

We supply amplifiers sized to your speaker load, install them in the control room or rack, wire the speaker lines and fire alarm link, and test the level in every zone before handover. Under our AMC, amplifiers, zones and announcements are checked during quarterly visits and the annual service.

The Maharashtra ACMS also covers the PA system, and FireSense IoT monitoring reports its status along with the fire alarm panel.

Engineer adjusting a public address amplifier in an equipment rack while speaking into a desk microphone, a fire alarm panel on the wall beside it

Why choose Cease Fire

  • Since 1992

    A Maharashtra Fire Services Licensed Agency (MFS/LA/RF-93/RD-95) that designs, installs and maintains fire alarm and PA systems.

  • One team for fire alarm and PA

    We supply both, so the fire alarm link to the PA system is wired and tested by the same team.

  • Right size first time

    We check the speaker load and zones before you order.

Request a quote

Send your speaker list or BOQ, the number of zones, and whether the PA should link to the fire alarm. We will size the amplifier and send a quote.

Frequently asked questions

What does a PA amplifier do?

It boosts the voice from a microphone or call station, plus any music or recorded message, and drives the speakers across the building. Most building systems use a 100 V line so one amplifier can run many speakers.

How do I calculate the wattage of a PA amplifier?

Add up the power taps of all the speakers it will drive and add a reserve of about 10% to 20%. For example, 40 speakers on the 3 W tap need 120 W, so a 150 W amplifier suits.

What is a 100 V line PA system?

It is a system where the amplifier sends the signal at 100 V so it can travel long distances on thin cable. Each speaker has a small transformer and a power tap, and all speakers connect in parallel.

Can a PA amplifier play evacuation messages from the fire alarm?

Many amplifiers have a priority input that the fire alarm panel can trigger. It mutes music and plays an evacuation message or live announcement to the chosen zones.

What is the difference between a mixer amplifier and a power amplifier?

A mixer amplifier combines microphone and music inputs in one unit. A power amplifier only drives the speakers and takes its signal from a separate mixer or controller.

Is the PA amplifier covered by ACMS?

Yes. The Maharashtra ACMS covers the PA system along with the fire alarm panel, and our FireSense IoT panel reports both to the owner and to us.

Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.

Call +91 9920676281