Fire Hydrant Valve (Landing Valve) in Mumbai

Two stainless steel fire hydrant landing valves with red hand wheels, single and double outlet

Cease Fire & Electrical Services LLP supplies ISI-marked stainless steel fire hydrant valves (landing valves) in Mumbai, in single and double outlet types made to IS 5290. They are fitted on wet risers at each floor and on yard hydrants around housing societies, offices, hospitals, factories and warehouses. As a licensed fire services agency since 1992, we also install, test and maintain the hydrant systems these valves serve.

Single and double outlet hydrant valves

  1. Standard

    IS 5290 Type A, ISI-marked

    IS 5290 Type B, ISI-marked

  2. Size

    63 mm, oblique type

    63 mm

  3. Body, bonnet and outlet

    Stainless steel SS 304

    Stainless steel SS 304

  4. Inlet

    75 mm NB flanged to IS 1538

    100 mm NB flanged to IS 1538

  5. Outlet

    63 mm female instantaneous

    63 mm female instantaneous outlets

  6. Outlet lug

    Quick-release (pull-out) lug

    Quick-release (pull-out) lug

  7. Seat test

    14 kg/cm² for 2.5 minutes

    14 kg/cm² for 2.5 minutes

  8. Body test

    21 kg/cm² for 2.5 minutes

    21 kg/cm² for 2.5 minutes

  9. Flow test

    900 LPM at 7 kg/cm²

    1,800 LPM at 7 kg/cm²

  10. Working pressure

    Up to 10 kg/cm²

    Up to 10 kg/cm²

  11. Handwheel

    Cast iron

    Cast iron

Need another size, material or flange? Send us your specification and we will confirm what we can supply.

Where hydrant valves are fitted

  • Wet risers: one valve at each floor landing, usually beside a hose box, so the fire brigade or trained staff can connect a 63 mm hose.
  • Yard hydrants: valves on hydrant posts around factories, warehouses and large campuses, fed by the ring main.
  • Double outlet points: where the design needs two hose lines from one point.

Why stainless steel

  • No rust

    Stainless steel resists corrosion in open yards, podiums and damp shafts.

  • Less theft

    It has a low scrap value, so valves are less likely to be stolen from common areas.

  • Quick hose connection

    The pull-out lug lets a hose be coupled and released fast.

Supply, installation and servicing

We supply hydrant valves on their own or with RRL hoses, branch pipes and hose boxes as a set. On our own projects we fit and pressure-test the valves and issue Form A for the completed hydrant work. Jammed, leaking or missing valves are common findings in fire safety audits; our AMC visits check each valve, its lug and washer, and we replace faulty parts.

Engineer turning the valve on a red wet-riser pipe beside an open hose cabinet in a stairwell

Why choose Cease Fire

  • Since 1992

    A Maharashtra Fire Services Licensed Agency (MFS/LA/RF-93/RD-95) with 1,500+ projects.

  • Specs you can check

    Every valve on this page is ISI-marked and flow-tested.

  • One team

    Valves, hoses, hose boxes, pumps, installation and AMC.

Request a quote

Tell us the number of valves, single or double outlet, and the inlet flange. We will confirm the specification and send a quote.

Frequently asked questions

What is a fire hydrant valve?

It is the outlet on a hydrant system where a 63 mm fire hose is connected. It is also called a landing valve, because it is usually fitted at the staircase landing on each floor.

What is the difference between a single and a double outlet hydrant valve?

A single outlet valve (IS 5290 Type A) feeds one hose from a 75 mm inlet. A double outlet valve (Type B) has a 100 mm inlet and feeds two hoses at once.

What is the flow rate of a fire hydrant valve?

Our single outlet valves are flow-tested at 900 LPM and double outlet valves at 1,800 LPM, both at 7 kg/cm².

Why use stainless steel hydrant valves?

Stainless steel does not rust and has a low scrap value, which reduces theft. It suits wet risers, podiums and open yards.

Which Indian Standard applies to landing valves?

IS 5290 covers landing valves. The valves we supply are ISI-marked to IS 5290 Type A or Type B.

Can you replace a leaking or jammed hydrant valve?

Yes. We replace faulty hydrant valves in existing buildings and check them during our AMC visits.

Do you supply hoses and branch pipes with the hydrant valves?

Yes. We supply hydrant valves on their own or with RRL hoses, branch pipes and hose boxes as a matching set.

Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.

Call +91 9920676281