Bronze Swing Check Valve in Mumbai

Three bronze swing check valves, one open to show its hinged disc

Cease Fire & Electrical Services LLP supplies the bronze swing check valve in Mumbai for small screwed water lines, in 15 mm to 100 mm sizes with BSP female threads. A swing check valve has a hinged disc that opens with forward flow and swings shut if flow reverses, with no handle or power needed. It suits hose reel feeds, small pump lines, tank connections and other small pipework in fire and plumbing systems.

Specifications

Sizes
15, 20, 25, 32, 40, 50, 65, 80 and 100 mm (½ to 4 inch)
Body
Bronze to IS 318 Gr. LTB 2
Bonnet
Bronze or forged brass (IS 318 / IS 6912)
Disc
Bronze
O-ring
Nitrile rubber
Ends
Screwed female, BSP
Working temperature
Up to 100°C

We also supply forged brass multi-utility check valves in 15 to 50 mm, with screwed female BSP ends. For flanged lines of 50 mm and above, see our non return valves.

Where swing check valves are used

  • Hose reel and small branch lines: to stop water draining back when the line is not in use.
  • Small pump connections: on the delivery of small pumps and booster sets.
  • Tank and plumbing lines: to keep water flowing one way between tanks, pumps and outlets.

Installation tips

  • Fit the valve with the arrow on the body pointing in the direction of flow.
  • Install it in a horizontal pipe, or a vertical pipe with the flow going upward. It will not work with the flow going downward.
  • Use thread sealant suited to water service, and do not overtighten the bronze body.
Engineer turning the hand wheel of a red gate valve on pump room pipework, with a butterfly valve, a non-return valve and a strainer along the same pipe

Supply, installation and servicing

We supply swing check valves on their own or as part of hose reel, pump and plumbing work. During AMC visits we check for leaks at the bonnet and signs that the disc is sticking, and replace valves that no longer seal.

Engineer turning the hand wheel of a red gate valve on pump room pipework, with a butterfly valve, a non-return valve and a strainer along the same pipe

Why choose Cease Fire

  • Since 1992

    A Maharashtra Fire Services Licensed Agency (MFS/LA/RF-93/RD-95) with 1,500+ projects.

  • Small and large sizes

    Screwed check valves from 15 mm and flanged NRVs up to 300 mm from one supplier.

  • One team

    Valves, pumps, hose reels, installation and AMC.

Frequently asked questions

What is a swing check valve?

It is a valve with a hinged disc that lets water flow one way. When flow stops or reverses, the disc swings back onto its seat and closes the line.

What is the difference between a swing check valve and a non return valve?

They do the same job. "Non return valve" is often used for larger flanged valves on pump lines, while the valves on this page are small bronze screwed valves for 15 mm to 100 mm pipes.

Can a swing check valve be installed vertically?

Yes, if the flow goes upward. It should not be fitted in a pipe where the flow goes downward, because the disc would not close.

What sizes do you supply?

We supply bronze swing check valves in 15, 20, 25, 32, 40, 50, 65, 80 and 100 mm, with screwed female BSP ends.

Why use a bronze check valve?

Bronze resists corrosion in water lines better than plain iron or steel. It also takes a clean screwed thread, which suits small pipework.

What is the working temperature?

The bronze swing check valves we supply are rated for water up to 100°C.

Do you supply flanged check valves for larger pump lines?

Yes. For pump lines of 50 mm to 300 mm we supply cast iron swing type, dual plate and wafer check valves. See our non return valve page.

Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.

Call +91 9920676281