Self-Adhesive Bitumen Tape in Mumbai

Rolls of aluminium-faced self-adhesive bitumen tape, one with its release film peeled back

Cease Fire & Electrical Services LLP supplies self-adhesive bitumen tape in Mumbai for sealing leaks at roof sheet joints, gutters, flashings and cracks. The tape is applied cold: you peel off the release film and press it onto a clean, dry surface, with no torch or heating. We supply the tape and can also carry out the sealing work on site.

What the tape is made of

Adhesive compound
Bitumen or bitumen-rubber compound that sticks to the surface and seals the gap
Facing
Often aluminium foil, which protects the compound and reflects heat
Release film
Protects the adhesive until it is peeled off for fixing

Also called bitumen flashing tape or aluminium flashing tape. It is different from bitumen wrapping tape, which protects buried steel pipes from corrosion.

How it is applied

  • Clean the area of dust, loose paint, oil and moss, and let it dry.
  • Cut the tape to length.
  • Peel off the release film and lay the tape over the joint or crack.
  • Press it down firmly, working out air and sealing the edges.

What to tell us

Surface
Metal sheet, cement sheet, concrete, gutter or pipe
Size
Tape width needed and total running length
Location
Open to sun and rain, or indoors
Scope
Supply only, or supply and sealing on site

Where it is used

  • Laps and fixings on metal and cement roof sheets
  • Gutters, downpipes and flashings at parapets and roof edges
  • Cracks and small joints in concrete
  • Around pipes that pass through roofs

Why choose Cease Fire

  • Since 1992

    1,500+ projects in Mumbai and beyond, for factories, warehouses, offices and housing societies.

  • Supply and application

    We supply the tape and our team can seal the leaks on site.

  • Clear quotes

    The brand and product data sheet are named in every quote.

Request a quote

Tell us the surface, the tape width and running length, and whether you need supply only or sealing on site. We will send a quote or arrange a site visit.

Frequently asked questions

What is self-adhesive bitumen tape used for?

It is used to seal leaks and joints on roofs, gutters, flashings and cracks. It is applied cold and sticks straight onto a clean, dry surface.

Does self-adhesive bitumen tape work on metal roof sheets?

Yes. It is widely used on the laps and fixings of metal and cement roof sheets. The surface must be clean and dry for the tape to stick.

Can the tape be applied on a wet surface?

No. The surface must be clean and dry, so the work is best done in dry weather or once the area has dried out.

Is bitumen tape a permanent fix for a roof leak?

It gives a lasting seal for joints and small leaks, but it does not replace full waterproofing of a terrace or roof. For large areas we recommend a membrane or coating.

What is the difference between self-adhesive bitumen tape and bitumen wrapping tape?

Self-adhesive tape seals leaks and joints on roofs and buildings. Bitumen wrapping tape protects buried steel pipes from corrosion and goes on over a primer.

Do you seal roof leaks on site?

Yes. We supply self-adhesive bitumen tape and can seal the joints on site in Mumbai, Thane and Navi Mumbai. Share photos of the roof and the running length for a quote.

Can self-adhesive bitumen tape be used on a factory roof?

Yes. It is widely used on factory and warehouse roof sheet laps, ridges and gutters. We supply the tape and can seal the joints on site.

Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.

Call +91 9920676281