Sprinkler Alarm Valve in Mumbai

Cease Fire & Electrical Services LLP supplies and installs the sprinkler alarm valve for wet sprinkler systems in Mumbai, in offices, housing towers, hotels, hospitals, factories and warehouses. The alarm valve is the main control valve of a wet sprinkler installation: it holds system pressure, lets water through when a sprinkler opens, and raises the alarm. We supply it with its trim and fit it as part of our sprinkler system work.
Parts of an alarm valve set
- Alarm check valve (clapper valve)
- Holds water in the system and opens when a sprinkler discharges
- Retard chamber
- Delays the alarm briefly, so pressure surges from the supply do not cause false alarms
- Water motor gong
- A mechanical bell driven by water flow, which rings without electric power
- Pressure switch
- Sends an alarm signal to the fire alarm panel
- Pressure gauges
- Show supply and system pressure above and below the clapper
- Main drain and test valves
- Let the installation be drained and the alarm tested
A main stop valve is fitted upstream so the installation can be isolated for maintenance. It should be supervised or locked open in normal service.
How it works
In standby, the clapper stays closed and the system holds pressure.
When heat opens a sprinkler, water flows and lifts the clapper.
Water passes into the alarm line, fills the retard chamber and reaches the water motor gong and pressure switch.
The gong rings, and the pressure switch signals the fire alarm panel.
What to tell us
- Size
- Installation riser size
- System
- Wet system; tell us if you need a dry, deluge or pre-action set instead
- Supply
- Whether the supply pressure varies, which decides if a retard chamber is needed
- Alarm
- Water motor gong, pressure switch or both
- Approval
- UL listed, FM approved or other, as your specification requires
We confirm the valve set against your drawings and specification before supply.
Supply, installation and servicing
We supply alarm valve sets on their own or as part of a full sprinkler installation, fit them in the riser room, and test the alarm at commissioning. During AMC visits we check the gauges, open the test valve to prove the gong and pressure switch, check that the main stop valve is fully open, and flush the alarm line.
Under the Maharashtra ACMS rules of 12 June 2025, covered buildings must monitor riser pressure continuously, including a low-pressure alert for sprinkler risers. Our FireSense IoT panel reports riser pressure every minute to the owner and the licensed agency. See the ACMS guide.

Why choose Cease Fire
Since 1992
A Maharashtra Fire Services Licensed Agency (MFS/
LA/ ) with 1,500+ projects.RF-93/ RD-95 Design experience
We design and install sprinkler systems to NFPA, NBC and FM guidelines.
One supplier
Alarm valves, sprinkler heads, flow switches and installation from one team.
Request a quote
Send your BOQ or drawings with the riser size and number of installations. We will confirm the specification and quote.
Frequently asked questions
What is a sprinkler alarm valve?
It is the main control valve of a wet sprinkler system. When a sprinkler opens, water flows through it and it raises an alarm through a water motor gong and a pressure switch.
What is the retard chamber on an alarm valve for?
It delays the alarm for a short time. This stops surges in the water supply from causing false alarms.
What is the difference between an alarm valve and a deluge valve?
An alarm valve serves closed sprinkler heads that open one by one in the heat of a fire. A deluge valve serves open nozzles and releases water to all of them at once when a detection system triggers it.
Where is the alarm valve installed?
At the base of each sprinkler installation, usually in a riser or valve room. A main stop valve sits upstream so the installation can be isolated.
How is an alarm valve tested?
By opening the test valve, which lets water flow as if a sprinkler had opened. The gong should ring and the fire alarm panel should receive the signal.
Can you supply UL listed or FM approved alarm valves?
Yes. UL listed and FM approved sprinklers and valves are available. Tell us what your consultant or insurer specifies, and we will share the manufacturer's certificate for the exact model with our quote.
Can sprinkler riser pressure be monitored remotely?
Yes. FireSense IoT monitoring reports riser pressure every minute, which supports the ACMS required for covered buildings in Maharashtra.
Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.
Call +91 9920676281







