Strobe Hooter cum Sounder for Fire Alarm Systems in Mumbai

Cease Fire & Electrical Services LLP supplies, installs and maintains the strobe hooter for fire alarm systems in Mumbai, for offices, factories, warehouses, hospitals, hotels and housing societies. A strobe hooter cum sounder combines a loud alarm tone with a flashing light, so people who cannot hear the alarm, or who work in noisy areas, still see the warning. We supply conventional and addressable versions to suit your panel and test each one before handover.
Where a strobe hooter is needed
- Noisy areas such as factory floors, plant rooms, DG set rooms and workshops, where a tone alone may be missed
- Areas where people wear ear protection
- Toilets, meeting rooms and other rooms where someone may be alone or unable to hear well
- Hospitals, hotels and public buildings with visitors who may have hearing difficulties
- Warehouses and large open spaces with a lot of background noise
Sound levels to plan for
IS 2189:2008, the Indian code of practice for fire detection and alarm systems, sets these rules for fire alarm sounders:
- Tone frequency
- 500 Hz to 1,000 Hz, continuous
- Minimum sound level anywhere people may be
- 65 dB(A), or 5 dB(A) above background noise lasting over 30 seconds, whichever is higher
- Sleeping areas
- 75 dB(A) at the bed head with doors shut
- Number of sounders
- At least one for each fire compartment
- Upper limit
- Above 120 dB(A) can damage hearing
Most single doors cut sound by more than 20 dB, so rooms usually need their own sounder rather than relying on one in the corridor. Several quieter sounders work better than a few very loud ones.
Flashing light
The strobe flashes when the alarm sounds. Common international practice, such as NFPA 72 in the US, calls for one to two flashes a second, and strobes in view of each other are synchronised so they flash together, which reduces the risk for people with photosensitive epilepsy. Tell us the room sizes and mounting heights and we will match the light output to the space.
What to tell us
- System
- Conventional or addressable, with the panel make and model
- Quantity
- Number of units and floors
- Areas
- Noisy, outdoor, damp or quiet areas, and any sleeping areas
- Mounting
- Wall or ceiling, indoor or outdoor
- Tone
- Any tone already used in the building, so all sounders match
Supply, installation and servicing
We supply sounder strobes with their bases, fix and wire them to the approved layout, and test each one before handover, including a check that the alarm can be heard across each area. Under our AMC, sounders and strobes are tested during quarterly visits and the annual service.
Sounder circuit and panel battery status can be reported through FireSense IoT monitoring, which supports the ACMS now required for covered buildings in Maharashtra.

Why choose Cease Fire
Since 1992
A Maharashtra Fire Services Licensed Agency (MFS/
LA/ ) that designs, installs and maintains fire alarm systems.RF-93/ RD-95 Proven on fire alarm work
Addressable fire alarm systems at 65 Adani Electricity substations in Mumbai.
Right part first time
We confirm panel compatibility and the sound levels needed before you order.
Request a quote
Tell us the number of units, the areas they will cover, and your panel make and model. We will confirm the right device and send a quote.
Frequently asked questions
What is a strobe hooter cum sounder?
It is a fire alarm device that gives a loud alarm tone and a flashing light at the same time. It warns people who cannot hear the alarm or who work in noisy areas.
Where should strobe hooters be installed?
In noisy areas such as factory floors and plant rooms, in rooms where someone may be alone, and in buildings used by people with hearing difficulties. At least one sounder is needed in each fire compartment.
How loud should a fire alarm hooter be?
IS 2189 asks for at least 65 dB(A), or 5 dB(A) above lasting background noise, wherever people may be. Sleeping areas need 75 dB(A) at the bed head with doors shut.
Is a hooter cum flasher the same as a strobe hooter?
Yes, both names describe a sounder with a flashing light. Some makers also call it a sounder strobe or a flasher hooter.
Why should strobes flash together?
Strobes that flash out of step can create a flicker pattern that may affect people with photosensitive epilepsy. Synchronised strobes flash at the same moment to avoid this.
Can I add strobe hooters to my existing fire alarm system?
Yes, if they match your panel's make and protocol and the panel has spare sounder capacity. Share the panel model and we will confirm a compatible device.
Can strobe hooters be mixed with plain hooters in one building?
Yes, if the panel has the sounder capacity and the same tone is used throughout. Plain hooters suit quiet areas, and strobe hooters go where noise or hearing difficulty means the tone alone may be missed.
Question not answered here? Call our team, Monday to Saturday, 9 am to 7 pm.
Call +91 9920676281







